Raleigh Twenty on a train

Well, she's not as small as a Dahon and nowhere near the compactness of a Brompton. Here, I haven't dropped the handlebars, or seatpost, so the folded package could be smaller than in the photo. Definitely useable, but not in a busy train I'd suggest. Fairly easy to fit inside the boot of an average car - I have managed to pack both a Dahon Speed D7 folding bike and this Triumph Twenty into the boot of an estate car, without the rear seats folded and with quite a lot of space to spare. This photo was taken before I'd changed the pedals and serviced the bottom bracket.

Renovating a Raleigh Twenty: Part 4 - Bottom Bracket

I was intending to service the bottom bracket and change the chain today, but was stumped by the fact that the old chain had 93 links. That's possible because of this half link with cranked plates - photo of the old chain above. I don't have a replacement, so had to order one. Anyway...on with the bottom bracket for now.

Above is a photo of the bottom bracket with the retaining ring removed. The cotter pins came out with no difficulties, thankfully, but I'll need new pins when I re-assemble.

Here's the axle cleaned up, with shiny new 1/4" balls, 11 each side. Cups were in reasonable condition and although the axle has bearing wear, it's good to go for a while yet.

I forgot to take a photo of what was inside the bottom bracket shell when I opened it. It was dry, balls were all present, but there were flakes of rust scattered around, mainly over the middle of the axle inside the shell. The photo above is after I'd cleaned it and packed the chainwheel side cup with ball bearings and grease. (The chain wheel side cup is welded in place). Looking inside, you can see that the shell itself is absolutely fine, the steel is in great condition actually. So, the flakes of rust must have fallen through from the seat tube opening - at the top of the cylinder. So, the frame saver that I squirted down the seat tube was needed! I decided to make a sleeve, in the good old fashioned way from a washing up liquid bottle.

Thing is, that nowadays, washing up liquid is not sold in cylindrical bottles any more! So, here's some transparent plastic taken from a bottle of some potion, nabbed from da boss's toiletries collection.

After a bit of snipping with scissors, in goes the sleeve. It butts conveniently against the lip of the chain wheel side cup. The ends overlap at the bottom, in case any water gets in there, it has a way out.

Here you can see the sleeve after being trimmed to size and in position. The outer edge is just inside the thread on the shell.

After screwing in the cup, I gave all the stay tubes a few squirts of frame saver. I've been doing that as I work round the frame, and the only tube that still needs some frame saver is the big chunky down tube.

On eBay, you can buy these cheepo plastic pipettes for pennies. These are great for all sorts of uses round the house, including squirting engine oil into the Sturmey Archer AW hub!

Next time I'll assemble the cottered cranks and fit the new chain. By the way, on close inspection, the chain wheel was not totally straight. Clearly it had been knocked from the side at some point in history. Actually, I had not noticed until now. A couple of whacks with a hammer, and the chain wheel was much straighter! That's the beauty of steel...

Shimergo Reynolds 531C road bike

I bought this Reynolds 531C frame brand new from SJS Cycles' eBay store. Originally, I fitted it with Shimano down tube gear levers, but later, I replaced them with Campagnolo Ergos, in a configuration widely known as Shimergo. This article by the CTC's Chris Juden explains it all. And I describe how I did it here.

Campagnolo Veloce 10 levers. These fit the hands really well. A friend of mine has a bike that is all Veloce 10 and he says that this Shimergo bike shifts just as well if not better his all Campag groupset.

Side view. I love the ride of 531C steel. It has a kind of springy, live feel. Steel is real!

Rigida flyer rims, allow hubs.

Closely spaced teeth numbers on the rear block.


I love the blue and red contrast! Personal taste, I guess.

Campag Veloce levers fit the hand really nicely.

Trusty Stronglight Triple and cartridge bottom bracket.

Shimano Tiagra rear mech.

Front brake, Shimano Tiagra dual caliper, in the evening sun...

Raleigh Twenty Links

Here are some of my favourite sites about the Raleigh Twenty:

1. Fabulous Raleigh Twenty to Life site.

2. Sheldon Brown's pages which I am sure are responsible for causing a number people to develop Raleigh Twenty addictions!

3. The history of the Twenty by Tony Hadland.

4. A super site by Hartley Martin collecting information from many Raleigh Twenty owners round the world.

Awesome Wooden bike

A wooden frame? This beauty is to die for! More details here and click here for the Waldmeister website. Marcus Wall Meyer seems to be a genius...the prices are tasty too!

Iceni Road Bike Photographs

In an earlier blog post, I explained that I'd bought this frame from Askew Cycles, and built it up from that. Here are some more images of the bike.


A view more from the front. Do you like the orange handlebar tape? Not to everyone's taste, I suspect!


It's a Reynolds 520 frame, which I think is the same as good old weldable Chro-Moly 4130. The Reynolds site says that it is similar in properties to old 531. Well I'm not sure about "standard" or touring types of 531, but my view is that 531C feels a bit springier, whereas 520 feels more "solid" in comparison. Still feels great though. Just my view.


Selle San Marco Rolls saddle, which I find very comfortable, and Lezyne saddlepack, which is nicely made and well designed.


The view from the "driving seat".


Stronglight Impact Triple chainset 28-38-50, the middle and outer rings are alloy, the inner one is steel.

Tektro brake levers, pedals Shimano SPD one side/flat other side, and Shimano 105 brakes front and rear. The whole bike cost me just under £500 in total for the frame and all parts. I dunno how long I spent building her, but I enjoyed every minute! Less than 1000 miles on the clock so far and a number of day rides of over 60km. She's a comfortable climber with lowest gear of about 23 inches (28T front, 32T back), also pretty nippy.

Renovating a Raleigh Twenty: Part 3 - Progress Update

So here is a photo of where I've reached so far. She's ready to roll. For comparison, below is how she looked when I bought her.

So far, I've done the following:

1. Cost of bike: £10
2. Remove kickstand and chainguard
3. Washed her. Removed down tube and seat tube labels. I'm still rubbing off the gummy sticker backing. It comes off with meths and elbow grease - doing it bit by bit
4. New gear cable and indicator protector cap: £5
5. Adjusted gear cable and lubed hub for smooth shifting
6. Dismantled forks and headset, spray frame saver inside forks, steerer and head tube
7. Serviced headset, with fresh ball bearings: £1
8. Changed pedals (I had some in my parts box)
9. Replace front rim and serviced hub: £18
10. New tyres front and back: £20
11. Alloy seat tube (the saddle is one I had lying around): £10
12. New rear brake cable: £5
13. Cleaned front brake cable and fitted new Dia Compe dual pivot calipers (photo below): £12

She's now a real pleasure to ride. Weight has reduced by 1.1kg so far (is currently ~14kg including the rack and pedals). Front braking is very good now and the back brake is satisfactory too. My 8 year old son and my wife love just riding about for the sake of it.

To dos:

1. Rear rim replacement
2. New rear brake
3. Strip and service bottom bracket
4. New chain

Still not sure about replacing the handlebars - they feel so chrome cruiser cool!